Residential solar
Rooftop systems sized to what your household actually draws, rather than to how many panels happen to fit.
- Bill analysis and site assessment, free
- Tier 1 panels, 25-year product warranty
- Panel-level monitoring from day one
7 to 9 hours of usable sun cross a Sydney roof most days, and land on tiles.
Solar panels, home batteries and monitoring, designed and installed across Sydney, NSW.
Move the slider to what you're paying now. Everything else is the consequence of that one number.
Use the figure from a recent quarterly bill, divided by three. Close is good enough at this stage.
Indicative figures only. Conservative model: typical Sydney irradiance, 70% of usage offset, average installed costs, solar only. A battery raises how much of your own solar you use instead of exporting — we size it to your evening pattern rather than quoting a standard box. Pitch, orientation, shading, tariff and real usage all shift these. Actual numbers follow a bill analysis and site assessment, both free.
There are only ever three places your solar can go: into the house, into the battery, or out to the grid. Which one it picks depends entirely on the time of day.
Of 18.8 kWh used that day, 14.6 came off the roof — 78% self-sufficient.
Modelled for an 8 kW array and a 15 kWh battery on a Sydney roof, at 15-minute resolution across a typical day rather than a best one. The grid still covers the early hours before sunrise once the battery has run down. Your pitch, orientation, shading and tariff all move these figures, which is what the free site assessment is for.
Every system starts from your usage data. These are the three parts we combine to fit it.
Rooftop systems sized to what your household actually draws, rather than to how many panels happen to fit.
Storage moves your own daytime solar into the hours you're home, instead of exporting it at a low rate.
Where consumption already lines up with generation, more of what you produce is used on site instead of exported.
Most quotes start with how many panels fit on the roof. We start with what you use, and work in this order.
Four quarters of real kilowatt-hours, not a postcode estimate.
When you use power decides whether storage earns its place.
Usable area, pitch, orientation and shading across seasons.
Export caps, switchboard capacity and phase, before design.
Matched to your consumption, with the reasoning shown.
About four weeks from first call to a switched-on system. Each step depends on the one before it, so none get skipped.
Bills analysed, roof and switchboard checked on site.
A sized system and a fixed price, with the reasoning shown.
Grid connection and rebate paperwork, handled by us.
Accredited installers on the roof, usually a single day.
Tested, monitoring set up on your phone, and explained.
If yours isn't here, the form below reaches a person rather than a queue.
It depends entirely on when you use power. If you're home through the day, panels alone offset most of the bill. If the house is empty until six, a larger array mostly exports at a low feed-in rate — that's the case where storage starts paying for itself. We model your actual pattern before recommending either way.
Panels still generate under cloud, at a reduced rate. Overnight you draw from the battery if you have one, and from the grid once it's empty. Nothing switches off — the grid connection stays as a backstop, which is why the modelled day still shows some electricity bought.
It depends on array size, roof access, switchboard condition and whether storage is included, which is why we won't publish a “from” figure. After the site assessment you get one fixed number, itemised, and it doesn't move afterwards.
Surplus goes to the grid and you're credited at your retailer's feed-in rate, which is well below what you pay to buy it back. That gap is the whole argument for using your own generation on site, and the reason we size to consumption rather than to roof space.
Yes. The grid-connection application with your distributor, and any rebate or certificate paperwork you're eligible for, are handled as part of the job rather than billed as an extra or left with you.
Panels carry a 25-year product warranty and a 30-year performance warranty, losing roughly 0.4% of output a year. Inverters and batteries carry ten years. Those are the manufacturer's terms, and we put all three in writing before installation.
No cost, no obligation, and no one turning up to sell you a package that was decided before they arrived.